Repeat first step on each wheel till no air comes out and brakes feel firm. Easiest way to bleed brakes ever.
The system will gravity bleed if you open the bleeder valve on the bell housing and leave the reservoir cap off.
How to bleed drum brakes without bleeder valve.
The bleeding process is the same for drum brakes as it is for disc brakes.
To do the job you need either a brake bleeder wrench or a combination wrench that fits the bleeder nozzle on your vehicle a can of the proper brake fluid a clean glass jar and a friend.
Attach a clear plastic tubing length to the bleeder.
Usually you start with the wheel furthest away from the master cylinder and then make your way from wheel to wheel moving towards the master cylinder unless otherwise specified in your owners manual.
Make bleeding the brakes super easy and speedy with no second guessing if you have air bubbles in the lines.
Soak the bleed screws in penetrating oil siphon as much rotten crud out of the reservoir as possible add fresh brake fluid start with the bleed screw furthest away from the master cylinder and work back to the closest one.
No matter the method the prep is the same.
My wheel cylinder bleeder screws are hopelessly seized.
Find the bleeder screw along the brake caliper down the front wheel of the drivers side.
This is the only safe way to do it.
The system is completely assembled theres no fluid right now in the lines.
Step 2 bleed the drum brakes.
Looses one valve at a time tighten it back up and have the friend then release the brake pedal.
Check the fluid level within the reservoir periodically in this procedure.
Do not let the reservoir go dry keep it full.
Motive products 0100 european power brake bleeder.
Have a friend pump the brakes then hold down on them.
So with out using the wheel cylinder bleeder screws can the brake system be bleed of air in the lines.
Using a piece of rubber hose that fits tight over the bleeder valve and directing the fluid into a container keeps the mess to a minimum.
Attach hose to bleeder screw.
Did every trick in the book to loosen them to bleed my brakes.
If your vehicle has squishy feeling brakes the way to get the air out of the lines is to bleed the brakes.
Never let it run dry at any time.
Load the master cylinder reservoir using fresh brake fluid.
No comments:
Post a Comment